 |
CAN-Bus Tester 2 |
|
New: Upgrade with
DeviceNet available and new Licensing Model
The CAN-Bus Tester 2 is available as a basic version with the Bus system
CAN. Optional Bus systems (such as
DeviceNet) and software modules can
be activated via license keys at any time.
|
 |
 |
|
|
The CAN-Bus Tester 2 constitutes a universal measuring instrument for the commissioning,
analysis, monitoring, troubleshooting and service/maintenance of
CAN-Bus plants.
Typical problems
which occur during the operation of CAN-Bus plants, such as node
failures, faults in the communication or complete standstill of the
plant, often have their origins in the physical bus characteristics. The
CAN-Bus Tester 2 provides an overview of the signal conditions on the
bus, which helps you locate and rectify frequently occurring error
causes without unnecessary delay.
|
|
You can already
ensure a correct bus cabling and verify its transmission properties when
setting up the plant. You can also perform comparing measurements
directly on the running plant over its lifetime and thus prevent
downtimes. |
| |
|
|
For a long-term monitoring of
CAN-Bus plants GEMAC developed the
CANobserver®. It is
implemented into the network permanently, monitors the data
transfer continuously and records it automatically for a period
of up to four years. |
| |
| Softwareupdate
4.0 - more user-friendly user interface as well as plenty of new
features |
| - Application window now freely resizable |
| |
| CAN Monitor Receive |
| |
- Display of CAN error frames and
overruns
- Display of start, stop and pause entries
- New trigger conditions (error, overrun)
- New search conditions (error, overrun, start, stop,
pause) |
 |
| CAN Monitor Transmit |
| |
|
|
| |
New Feature - Sequence lists
- a sequence combines CAN messages
- configurable waiting time between messages
- one-time or repeated transmit of sequences |
|
| |
| Download |
|
Datasheet CAN-Bus Tester 2 |
|
|
User Manual
CAN-Bus Tester 2 |
|
Software CAN-Bus Tester 2 |
|
| Attention:
Softwareupdate is only for firmware v2.x. Users with firmware
v1.x contact
our sales department. |
| |
|
| Ordering Information: |
|
| |
|
| Description |
Article Number |
| CAN-Bus Tester 2, basic version, bus system: CAN |
PR-22517-10 |
| License key for bus system CANopen |
SW-22517-01 |
| License key for bus system DeviceNet |
SW-22517-02 |
| License key for bus system SAE J1939 |
SW-22517-03 |
| License key for CAN monitor (transmit/receive) |
SW-22517-10 |
| |
|
Home
